£450,000 appeal launched to fund the tender for Britain’s most powerful steam locomotive as order placed for construction of the tender tank.
The project to build Britain’s most powerful express passenger steam locomotive today announced a new £450,000 appeal to fund the manufacture the tender for new Gresley class P2 No. 2007 Prince of Wales. The A1 Steam Locomotive Trust has set itself the challenge of raising £450,000 through The Tender Club from 250 supporters each donating £1,500 (plus Gift Aid) to the project in up to 15 payments of £100 by standing order. The Trust is also pleased to announce that the order to manufacture the tender tank has been placed with North View Engineering Solutions of Darlington. The tender frames are currently under construction by I D Howitt of Crofton, Wakefield.
The Gresley class P2 2-8-2 ‘Mikados’ were the most powerful express passenger locomotives to operate in the UK. They were designed by Sir Nigel Gresley in the 1930s to haul 600 ton trains on the arduous Edinburgh to Aberdeen route. Sadly, the design was never fully developed and they were rebuilt by his successor Edward Thompson into ungainly class A2/2 4-6-2 'Pacifics' in 1943/4, and scrapped by 1961. The A1 Steam Locomotive Trust (A1SLT - registered charity and builders of famous new 100mph steam locomotive No. 60163 Tornado) is building the seventh member of this class at its Darlington Locomotive Works (DLW) over seven years, at an estimated cost of £5m through its P2 Steam Locomotive Company subsidiary. The project will demonstrate how the design can be fully realised through use of modern computer design techniques, enabling the new locomotive to deliver its full potential hauling passenger trains at high speed across today’s national network.
If the project is to remain on schedule to complete No. 2007 by 2021, the Trust needs to take delivery of the tender frames and tank in autumn 2019. Following the success of The Founders Club (to get the project to the point of cutting the frames), The Boiler Club (to fund the construction of the boiler), The Mikado Club (to wheel the locomotive), The Cylinder Club (to make the cylinder block), The Motion Club (to fund the heavy motion) and the Dedicated Donations scheme the Trust has decided to establish The Tender Club to raise an estimated £450,000 required to manufacture No. 2007’s tender.
In return for supporting this appeal, special benefits for members of The Tender Club include:
- Opportunity to buy ticket (seat already reserved) on one of the first trains hauled by No. 2007 Prince of Wales
- Reasonable access to No. 2007 at all times
- Opportunity to buy exclusive Tender Club badge
- Opportunity to join one of the teams building No. 2007
- First choice of other components to sponsor
- Special Tender Club day with Tornado
- Special limited-edition print of Stephen Bainbridge’s ‘Locomotives of the future’ painting
The tender for No. 2007 Prince of Wales is based closely on the tender built for A1 class No. 60163 Tornado. The original P2 tenders were to the 1930s non-corridor design built for the new A3 Pacifics being built at that time.
The water capacity of the original design was 5,000 gallons, which at a typical consumption of 45 gallons per mile would provide a range between water stops of 80 miles (with as safety margin). The tender for Tornado was re-designed to increase the water capacity to 6,250 gallons which increases the range to about 110 miles. The additional water capacity is at the expense of a reduction in coal capacity from 9 tons to 7½ tons.
The tender tank will be a fully welded structure made from weathering steel (as used on motorway bridges and the Angel of the North) to provide improved resistance to corrosion. The main visible differences with the new tender when compared to that of Tornado will be the curving inwards of the side sheets at the front to match the shape of the cab sides, and the extensive use of half round beading along the front and top of the sides and the top of the back of the tank.
Progress building Britain’s most powerful steam locomotive continues at Darlington Locomotive Works and includes:
- Frame plates for engine and tender rolled and profiled; engine’s frames erected at Darlington Locomotive Works; all major engine frame stays, brackets, horn blocks, axle boxes and buffers cast (44 in total); over 1,000 fitted and driven bolts ordered and delivered, approximately 800 now fitted to the frames
- All engine wheelsets complete; materials for tender wheelsets including tyres, axles and wheel centres delivered
- Preliminary discussions held with boiler manufacturers and forged foundation ring corners manufactured and machined; boiler design study commissioned; start made on boiler fittings with castings for combined injector steam and delivery valves; regulator castings delivered; superheater header cast and machined
- Study into ride and suspension completed using rail industry standard Vampire® software; finite Element Analysis completed on re-designed crank axle to ensure locomotive complies with modern standards; assessment and notified body appointed to oversee certification - first site visit made
- Cab erected and cab side and spectacle window frames fitted; engine footplating and splasher kits delivered and permanently fitted to frames
- Smokebox door pressed; details made and door completed; door frame manufactured; smokebox delivered and erected; chimney cast and fitted
- Crosshead castings received
- Boiler cladding assembly jig built; cladding crinolines and hoops rolled and fitted to jig; cladding sheets procured, rolled and fitted to jig; jig trial fitted to the frames
- Tender frame construction under way, axlebox and other tender castings ordered from William Cook Cast Products
- Nameplates and chime whistle delivered
- Significant progress on design and manufacture of pipework
- Over £2m spent, £2.5m raised and £3.2m pledged of the required £5m.
Mark Allatt, P2 Project Director and Trustee, The A1 Steam Locomotive Trust, commented:
“We are delighted with the level of support that the project to build Britain’s most powerful steam locomotive has received since its launch. Thanks to our supporters’ continued generosity, over £3.2m has now been donated or pledged.
“We now want to turn our attention to the tender which is our next major manufacturing challenge. We have now placed the order for the tender tank with North View Engineering Solutions of Darlington and the tender frames are well underway by I D Howitt of Crofton, we now need to raise £450,000 through The Tender Club over the next few months. This will allow us to remain on-track for completion of the new locomotive in 2021.
“I would encourage all steam enthusiasts who haven’t yet contributed to this exciting project to help us to meet these deadlines by becoming a member of The Tender Club or a monthly ‘P2 for the price of a pint of beer a week’ Covenantor. It’s time to get on board! This year will see further major announcements as the construction of new Gresley class P2 No. 2007 Prince of Wales gathers pace.”
Latest from Unseen Steam
- Plan to build new Gresley Class V4 steams ahead
- Flying Scotsman arrives in Swanage for rare reunion
- Historic steam loco makes furthest trip south for Swanage's Spring Steam Up
- Daughter of man who saved Scotsman from scrapyard to wave off loco's first Swanage trip
- The 2nd Purbeck Scotsman - McIntosh 3P 0-4-4 No 419
- Purbeck Scotsman - No. 60103 from Swanage to Norden
- March Galas 3 - The Bluebell's LSWR Gala
- March Galas 2 - East Lancs HQ (Spring 2019)